Welcome: Yuanfang Steel Co., Ltd.

service@shanglesteel.com +86-577-88689565

Product

Home       Products


Acid Resistance Bright Annealed ASME SA213 TP304 1.4301 Seamless Tube


            

Product Description:

Bright Annealed ASME SA213 TP304 1.4301 Seamless Tube Austenitic

 

ASTM A213 covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes.

Bright annealed stainless steel tube is a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tube is mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe.

 

Bright Annealed Stainless Steel Tubing Advantages


1. Superior Surface Finish
2. Better Mechanical Property
3. More Precise Dimension

 

 

ASTM A213 TP304 is a grade that covers standard heat exchanger or high-pressure tubes that are designed with 304 austenitic stainless steel. The ASTM A213 TP304 Tube is designed with a superior composition consisting of chromium and nickel.

 

This gives the tubes enhanced resistance against corrosive and oxidative media across an array of stress-induced environments. The grade covers standard seamless, welded, and erw configurations.

 

 

 

 

Chemical Composition:

 

ElementTP304, %
C≤0.08
Mn≤2.00
P≤0.045
S≤0.030
Si≤1.00
Cr18.0-20.0
Ni8.0-11.0

 

 

Tensile & Hardness Requirements:

 

Mechanical
Requirements
TP304
Tensile Strength,
min. MPa [ksi]
515 [75]
Yield Strength,
min. MPa [ksi]
205 [30]
Elongation in
2", min. %
35
Brinell Hardness
max. HBW
192
Vickers Hardness
max. HV
200
Rockwell Hardness
max. HRB
90

 

Equivalent Material:

 

GradeOld BritishUnified Numbering SystemSwedish SSEuronormJapanese Industrial Standards
British StandardsEuropean StandardsNoName
ASME SA213 TP304304S3158ES3040023321.4301X5CrNi18-10SUS 304

 

 

Tolerance of ASME SA213 TP304 Seamless Tube:

 

Nominal Pipe SizeOuter Diameter Tolerance
+
InchmmInchmm
1/8~1 1 /2
> 1 1 /2~4
> 4~8
> 8~18
> 18~26
> 26~34
> 34~48
1/64(0.015)
1/32(0.031)
1/16(0.062)
3/32(0.093)
1/8(0.125)
5/32(0.156)
3/16(0.187)
0.4
0.8
1.6
2.4
3.2
4.0
4.8
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
0.8
0.8
0.8
0.8
0.8
0.8
0.8


Inquiry:

CATEGORIES

CONTACT US

Contact: California

Phone: +86-18814989998

Tel: +86-577-88689565

Email: service@shanglesteel.com

Add: No.543, Yongchang Road, Gaoxin Park, Longwan District, Wenzhou City, Zhejiang Province

Leave a message

 
Top